Whitewash A Brick Fireplace, step by step

Did you know you can give your whitewash your brick fireplace with paint you already have around the house? We were able to give our fireplace wall a fresh look in under a day and with no money spent!

close up detail of brick wall fireplace with a Hands-on whitewash treatment applied

We do not mind unpainted, exposed brick, but in all of our houses it is been an unattractive orangey-brown brick – not that fairly rustic red brick you find in New York apartments. So in previous homes we have straight-up painted those walls because we ENJOY the look and texture of painted brick. But after seeing a few whitewashed brick walls over on Pinterest and reading a few walkthroughs online, we chose to give whitewashing a spin this time. We figured if we did not like it we could consistently simply paint over it!

Sherry dabbing watered down paint onto red brick fireplace for whitewash effect

Luckily, we truly like it! The room is far from done, and it might not be a forever thing, but for a day of work and a total cost of $0 we are truly pleased with the outcome.

living room with navy blue furniture and a whitewash brick fireplace wall

Materials Needed For Whitewashing Your Brick

This supply list is short & sweet and likely includes a lot of things you have leftover from other painting projects:

Regular white latex paint
Paint pail or other container for mixing
Paint stir stick, spoon, or other mixing device
Paint brush
Water
Rags or old t-shirts
Drop cloth and/or rosin paper
Scrub brush or wire brush (optional)

They do make special whitewash paints and even more durable limewash applications for exterior use (similar to the paint we used when we painted our home’s brick exterior white), but for a plain interior project like this it is fine to save your money and use regular paint you’ve used on your walls.

And, like the material list, the steps are fairly straightforward too. Here is how I knocked it out in a day.

Step 1: Clean Your Brick

First, I wiped down the brick to make sure there were not cobwebs and old soot all over it – simply a good once over with an old rag did the trick. However, depending on the condition of your brick, you may want to use a scrub brush or wire brush to remove any loose material or dirt.

dark living room brick wall with a fireplace from 1980s home

Step 2: Create Your Whitewash Mixture

Next I mixed up a mixture of one part water + one part paint in my paint pail. I used Simply White by Benjamin Moore in an eggshell finish since had some leftover from a previous project. But any of these best white paint colors would work. The consistency was fairly drippy and watery. Imagine taking a gallon of paint and pouring out half of it and refilling that half with water.

Step 3: Apply With A Brush & Rag Technique

I used a regular paint brush to “wash” on a thin layer of this watery mixture over the whole surface, brick by brick, including the mortar. I moved swiftly and sort of smeared it onto each brick with the brush, and then dabbed over it with a rag – simply to remove any excess paint and absorb any drips (since it was so runny those popped up from time to time).

Sherry dabbing watered down white paint on brick wall

The dabbing took more arm strength than the washing-with-the-brush step, and I tried to work as fast as I could – simply because I had heard that it could go fairly swiftly and I could not wait to step back and survey a larger area to see how it looked.

whitewash brick technique being applied to living room fireplace wall made of brick

Here is a swift video of the process for ya:

Note: You can also watch this video on YouTube.

The bricks soak up the wash fairly swiftly. When you first run your brush over them it may seem like you’ve straight up painted them white. But after you dab and the paint has a chance to soak in, the brick’s coloring comes oozing through.

Detail of whitewash brick hearth fireplace

After finishing my first coat on the wall, I moved to the hearth and realized I was about to get drippy paint-water all over our wood floors. Oops! So I took a second to tape off the floor with rosin paper. It is waterproof, which is pleasant because I did not have to worry about any drips soaking through to the floor.

nearly completed coat of whitewash paint technique on fireplace brick wall in dated living room

Step 4: Let Dry & Evaluate

It likely took me about two hours to do the first wash and by then most of it had soaked in and dried. So, I stepped back and was faced with the question: should I leave it or do another pass? That is the beauty of this technique – you can apply additional coats to make your whitewash more solid / opaque if you do not like the original results.

lightly whitewashed brick wall in living room with fireplace and mantle using leftover white paint

I chose that in person too much dark red and brown was still showing through in a few areas (it is harder to tell in these photos) so I chose to go for a second coat.

Step 5: Apply Additional Coats As Needed

For my second coat, I mixed up an even waterier second wash and then went over the wall again – simply to add a bit more haze. So if my first whitewash mixture was equal parts paint and water, this second mix was more like one-third paint + two-thirds water.

That coat was much faster – perhaps an hour, tops. After that second pass, I was truly glad with it. The room no longer felt as dark and cavernous, but the brick still had a lot of texture and detail in person (this photo makes it a bit harder to see than in person, unfortunately). I enjoy the weathered effect that it gives without feeling too “faux wrapped up” or “Medieval Times” (not that I did not enjoy that place as a kid).

darker whitewash technique on brick wall fireplace using two coats of watered down white paint

From afar the wall looks sort of chalky and textured and varied – as opposed to the glossy and especially white result we would’ve gotten from painting it normally. When you get closer you see more of the fairly details of each brick. Some are a bit lighter. Some are darker. Some are craggier. It is a pleasant mix.

We still have a long ways to go in this room, but whitewashing this once dark wall was a LARGE assist in making the space feel brighter and less cavernous (which is tough, since it gets the least natural light of any spot in our house).

stylish and colorful living room with navy blue furniture, graphic pillows and rug, wood beams, and whitewash brick fireplace wall

Either way, I am glad the room is looking decidedly less salmon these days.

dated 1980s living room with dark brick wall, wood beams, and red salmon colored walls

Some folks have asked if we have considered painting the wood beams, wainscotting, and mantle. We are certainly leaning towards it, but we do not want to rush into anything. I consistently say never to paint brick or wood unless you are 100% sure you will like it since it is so hard to undo! In short, wait until you cannot stand waiting another second to paint it and only then should you grab a brush.

Update: We Painted It!

After a few years of living with the whitewashed brick, we chose we needed to significantly lighting up the living room even more. So using a paint sprayer with painted the brick and wood Benjamin Moore Simply White, and it did wonders for the room.

White living room with traditional rug and fireplace

A whole lot else evolved in the room over the 7 years between the original whitewashing and when the above was taken (we constructed a new mantle, changed out some furnishings, etc), but we are grateful that the whitewashing project gave us the confidence to make major changes to this space.

how-to-whitewash-brick-with-watered-down-paint

Update- We at last created this Shop Our House page to assist you hunt down any furniture/accessories that you see in our house, along with all of our paint colors.