Make A Faux Flower Mobile For The Nursery, step by step

Remember how we mentioned in our Charlotte window shopping post that we found inspiration for our nursery mobile at a charming little shop called Lucy & Co? Well, after talking to the incredibly inspiring designer of the yellow butterfly mobiles we learned that all it took to whip them up was some floral wire, some yellow fabric butterflies, and some glue. Sounds doable, right? But instead of butterflies we chose to brainstorm a few other “things” that could appear to be swarming around in a ball above our baby girl’s head. John kept harping on bees because they were on our homemade wedding invitations…

… but I thought that might be a bit terrifying. Bees in the nursery? Yikes. We at last settled on small yellow and pink blooms after we slipped through Micheal’s to check out what they had on hand. We were crazy about the small feathery little florets that we could pop right off of the stems and we enjoyed the idea of adding some yellow and pink to our soft green and aqua palette. Plus they were buy one get one free, so for $8 we picked up two giant bunches of faux hydrangea blooms (one bunch in yellow and one bunch in pink).

We also picked up some silver floral wire to the tune of a few bucks. Then we parked our butts on the couch in front of the TV and watched The Celebrity Apprentice while we messed around with the floral wire and tried to create three orbs that we could cover with a swarm of hydrangea blossoms. This step of the process was sheer trial and error. We began by making a few loops of wire to establish the size of the sphere and then gradually took it from a 2-D circle into a 3-D ball-shaped mass of wire while Burger watched with suspicious half-closed eyes (see his legs below).

In the end our little orbs turned out feathery and haphazard and semi-ethereal. We could certainly work with them and we were sure to make one big beach-ball sized one along with one that was about the size of a cantaloupe and one that was somewhere in between. And as you can see from the image below, we left a few wires feathering out from the sphere for a light and airy look (once we glued the flowers on). Note: we later took out the little wire handle that we created on the top of the orb (stay tuned for more hanging details).

After we made all three wire spheres we got to work popping off the blooms from each individual stem on our faux hydrangea bouquet (by this time we were watching The Remarkable Race- this is one of those takes-a-while-but-you-can-do-it-kind-of-on-auto-pilot projects).

Each individual flower came off with a bit of a hollow nub in the back, which used to slide over the stem to keep it in place.

So in order to attach our flowers to the wire, John geniusly suggested that we use an Exacto knife to cut each of the nubs vertically up the center about a centimeter, which created a forked pincher that we could dab with some glue and slip over the wire to adhere them to our spheres. And it worked! The pincher held it in place long sufficient for the glue to dry and truly secure it for the long haul. So the forked flower nub + a dab of glue was all it took to secure each of our blossoms, which we clustered around each sphere randomly for a charming unplanned and not too overly balanced look. Oh and we used Aleene’s Original Tacky Glue (which we already had laying around) as our glue of choice since it is non-toxic and water-based (both good selling points for anything that will live in a nursery).

Then we dug three small white ceiling hooks out of our screws/nails/etc drawer (they can be found at any hardware store or even at Target if you do not have them on hand) and John drilled three compact pilot holes into the ceiling. It was helpful to whip out the drill simply to get things began since it is hard to have strong leverage when you are trying to screw something into the ceiling. Oh and as for placement we simply suspended each orb with regular old white sewing thread and John moved them around until we chose on the best three spots for our hooks. Again, we went the trial and error route.

And here they are all hung up on those white hooks with nothing more than white thread keeping them suspended. We enjoy that the thread is so hard to see that they nearly appear to float in the room. We certainly hoped them to look light and airy (and we enjoy that we had the thread on hand so it was f-r-e-e). As for how we staggered them, again we simply experimented with distinct lengths of string and kept stepping back to see what looked best. In the end we enjoyed that none of our orbs were exactly the same size and that they were all hung at slightly distinct heights- simply to keep things interesting.

Here is more of a detail shot for you. See how invisible the string is? And how those little offshoots of wire ended up looking truly whimsical and sweet once we brought in some blooms? Plus we enjoy the lively shadows that they cast on the wall. Who knows, perhaps the beanette will stare at those more than the actual mobiles.

And we mentioned that we took out those large wire “handles” that we initially made in favor of simply pinching the wire in a spot on the orb (simply a bit) to create a much smaller and less obvious place to loop the white thread around. Thankfully, it worked like a charm.

And although you are likely assuming that we hung them over the crib, we in fact opted to place them over the changing pad above our newly refinished dresser since that wall was looking a little bare (and we already had a strong mirror on the wall above the crib to bounce around a lot of light from the window across the room and serve as a lively and colorful shape for Baby P to gaze at). Of course our new trio of homemade mobiles might look a bit high and a smidge off-center but we have other plans for that wall as a whole so you will have to stay tuned for those details…

And speaking of our changing table pad, we hoped to share how easily we secured it to the dresser using the screw & snap system that came with it. See the screw that I am holding in the photo below? It has a large and especially firm snap on the back of it, so you simply have to secure it to the back of the dresser in line with wherever you want your pad to be placed…

… and screw it firmly into place…

And then you can snap your changing pad so that it is fixed for the long haul (there was one snap-screw that we attached for each end of the pad so it is wiggle proof and extra secure).

And you may have noticed our little blue fan. We have heard time and time again that good air circulation (ie: a fan in the nursery) can cut down on SIDS and make for a comfortable and glad baby- so we invested in a cute (and finger-pointer-safe) Deco Breeze fan for the other side of the dresser that we can easily aim right at the nearby crib to cool down the beanette. We enjoy how it looks with everything from the aqua ceiling and chandelier to our printed curtains (and you get a little sneak peek of another nursery furnishing that we will elaborate more on later in the background below).

So that is how we made a lively little three-sphered mobile to hang above the changing table pad that we secured with some plain hardware. Oh and if you are wondering where we got the changing pad cover, it is in fact from the same place where we got our organic aqua crib sheets (the changing pad cover is also organic, and we thought the price was fairly darn good). What about you folks? Have you ever made a mobile? Any pointers or project ideas to share with the group? Any other changing-table-safety methods that you’ve implemented? Do tell.

Psst- Wanna see our nursery progress from the quite beginning? Here is our painting post, our big shopping spree, our crib hunting rundown, our curtain-making walkthrough, our lively little chair search, our mirror-painting extravaganza, our Hands-on faux sheepskin project, our big dresser makeover (and subsequent drawer lining project), our closet makeover, and our homemade crib skirt undertaking. Good times.