Make Pleated Curtain Panels, step by step

I have consistently thought that curtains are the unsung hero of room makeovers because everyone’s swift to talk about how paint can make such a large difference (agreed, it totally can) but I’d argue that curtains can rival the whole “wow, paint totally changed that room” because they can:

• make a small window look twice as wide
• draw the eye up and make ceilings feel taller
• add a whole lot of color/pattern/interest (or not, if you simply want something plain/breezy)
• make any room feel more cozy by adding softness
• add function (block light and drafts, provide privacy, absorb sound, etc)

So there it is. My name is Sherry, and I am a fan of curtains. Simply look at the nursery wall without any:

And here it is now with some glad green-apple deliciousness going on:

This room is still far from wrapped up (we are planning a colorful large-scale mobile for over the crib – perhaps something like this – and the bare wall across from the crib still needs furniture and art). But back to the curtains. They make such a difference, right? I also tried a new pleated approach this time, along with an extra thick hem at the top and bottom to give them some brought in heft, and I am a complete fan. It was truly straightforward, so I will simply stop yapping and dive into the details.

When it came to picking the fabric for the nursery, we knew we hoped something glad and colorful since the walls and built-ins are a neutral palette (Clara’s white-walled yet especially colorful room has taught us that safer choices on those harder-to-change surfaces leave things wide open to layer in a lot more personality and color with other accents like textiles, art, and accessories). We considered everything from a bold pattern to a lively dip-dyed look or a band at the bottom, but thought one solid hue would be pleasant because we did not want anything that would look too busy next to our patterned rug and crib bedding.

We were in fact truly inspired by the distinct tones of green in the Target box that we lately grabbed for the built-ins, along with our old stacking tree game, which both showed us how strong a vibrant apple green color could look with a darker kelly tone in the mix.

We hit up a local place (U-Fab) as well as JoAnn fabrics, and ended up falling for a cheerful apple green color at JoAnn. We thought it would layer in nicely with the kelly green bedskirt, bike art, and chair pillow without being too matchy or flat. I picked up five and a half yards of fabric, which was listed at $6.99 a yard (it is 100% cotton, and the color is Solid Apple if that helps you track it down at JoAnn) but I used one of those 50% off coupons so my whole purchase was $19.22, which means each of my panels breaks down to being under ten bucks.

The first thing I did when I got it home was pre-wash it (this helps you avoid shrinkage on the back-end, which can result in highwater panels if you wash them later). Then I laid my fabric on the floor and folded it in half (length-wise, not width-wise) and cut along the fold so I was left with two equally sized 99″ panels. My desired wrapped up length was 88″ so that meant I could have a pleasant weighty 5.5″ hem at the top and the bottom. First I hemmed the top and bottom of the panel simply about an inch from the edge with hem tape, like so:

Heavy duty Heat N’ Bond is a go-to of mine, simply because I have made a few curtain panels with my sewing machine and others with hem tape and find that hem tape is easier for me to get a pleasant straight seam instead of a slightly meandering one. I have also had luck with durability (and washability) in a nursery/kids room with it over the last 3.5 years (all of Clara’s curtains have been hemmed with the stuff) so that made it an straightforward choice.

After making that first 1″ hem on the top and bottom of the panel, I folded each one of them over again to make a 4.5″ cuff, so I was left with a pleasant wrapped up looking edge on each end (that is why I did that little 1″ hem first). Even though it is the back of the panel, it does not take much time to make that extra little fold, and it ends up looking pleasant and clean.

Again I used hem tape to secure that flap of fabric at that 4.5″ mark.

After securing each of those top and bottom hems, I hemmed the sides (simply with plain 1″ one) to keep the panel as wide as possible, but give it a wrapped up edge. Here is what one panel looked like on the floor with the backside-up, wrinkles and all.

Next I ironed each panel to get a bunch of the wrinkles out (they honestly still could use a steam-session now that they are hanging in place) and then it was time to give the whole “pinch-pleat effect” a try. Instead of my usual MO of clipping rings to the top edge of the fabric (so the curtains hang like this or like this), I pinched the fabric in ten equal increments and secured the clip to the back of the top hem, about 2.5″ from the top of the panel. Burger was intrigued.

Here is a close up for you of that top hem along the back of the panel (again, I simply used ten ring hooks and spaced them out by eye in as-equal-as-possible increments).

This is John holding up the rod after I strung one panel on so I could snap a picture of the back for you folks.

And here is what they look like from the front after hanging them with the anchors and screws that came with the rod we picked up at Home Depot:

Do not those pleats add a little something extra? I like that they are not especially ideal & uniform (it is more of a casual pleat if that makes sense) but they still feel a bit more upgraded than the regular old ring-hook look that I am used to. If you are at home thinking “I’d make those, but I wish each pleat was identical and especially uniform” – fear not. You could likely stand on a stepladder and tweak the clips in the back to even everything out. John and I simply thought they looked sort of effortlessly cool this way. Either that or we are too lazy to break out the step-ladder.

Update #1: We are getting a bunch of questions about if we are planning to use blackouts and/or if these curtains can close to block light. They can close (they are each 56″ wide) but we have light-blocking faux wood blinds on all of the upstairs windows (more on those here) so we typically simply close those instead of the curtains. Although I might add some blackout panels to the back of these panels like we did in Clara’s room if this guy ends up loving total darkness like her. Will keep you posted!

Update #2: Also getting questions about where the chair’s from. We picked up that from Joss & Main a few years ago (it used to be in the corner of the kitchen across from the fireplace in our old house, and was in our office at this house until we realized it made more sense in the nursery). The white pouf is a sale find from J&M too.

It is certainly feeling a bit more like home (and making this baby on-the-way thing feel a bit more real) to see how much this space has changed since we picked up the house.

I am telling you, curtains make the difference. Ok, and a new floor, some wall paint, a pair of built-ins, crown molding, and furniture assist too.

So that is what is new in the nursery. And Operation Homemade Mobile is in fact in progress, so I hope to share that with you folks soon – along with some updates to the fully blank wall across from the crib. Have any of you ever done pinch-pleats, either with the sewing method or the ring-clip method? Do they make you feel fancy? Was your dog especially interested the whole time?

Psst- Wanna know where we got something in our house or what paint color we used? Simply click on this button: