Make A Beanbag Pouf, step by step

It is Wednesday the 14th… so it is time to share this season’s (fully unofficial) Pinterest Challenge (not sponsored by Pinterest or anyone else, simply dreamed up by Katie to make us stop pinning and start doing).

I in fact tackled a homemade beanbag for Clara’s closet, which I mentioned last Wednesday when Katie, Erin, and Cassie and I issued our little get-off-our-bums-and-make-something challenge.

As are the rules, I took inspiration (or Pintspiration, har-har) from the projects below and then I did my own spin. Which brought in up to this comfy little bean-bag…

… for the bean to plop down on…

… or the pooch to hang out on…

… or for a toddler reading to a chihuahua…

… or a tired momma or daddy (it works for that too).

And after declaring my goal, two kind commenters shared a link to this journal, which had an excellent walkthrough that I chose to go with.

It was clear, concise, and fairly darn straightforward to follow, even for a novice like me, so I cannot say sufficient about how much it came in handy! Oh my gosh, and I in fact mastered piping. This is big folks. So big I in fact had to call my mom and tell her. Big sewing strides going on in our house. Haha.

My method? I simply crossed my fingers, tried to follow the instructions, and did my own riff when it came to size (I hoped something a bit bigger than 17″ wide, so I made my pattern 22″ wide (by simply sizing up the instructions that were over here). But seriously, a seamstress I am not. So all you fancy sewing folk try to hold your giggles as you read about the most-likely-not-proper ways that I cobbled this thing together. The result is comfy, looks good, and gets two toddler thumbs up, so I am thrilled! And it made all of that sewing machine wrestling (more on my tumultuous relationship with my sewing machine here) worth it. And now, more pics:

And here is how I made it (there are much clearer explanations and pics over on this journal, where she clearly knows gobs more about sewing than I do!). First I cut out two 22″ circles, two tabs to make the handle, and fabric to make the rectangular-wrap-around part (all measurements/pattern details are on this journal). I used leftover fabric that I had from a book project in fact (wahoo, secret sneak peek!) but only had a yard so I was simply shy of having sufficient to make the last circle so for the base I simply used other fabric I had on hand (both are from a local fabric store called U-Fab but I do not know the fabric name/model since it is an outlet – so sorry!).

Then I pinned my piping around the perimeter of the fabric (piping side in, with the end lining up exactly with the perimeter of the fabric, print side up).

And I left the ends like this as directed in the walkthrough. I also did the same thing for the other circle of fabric…

… and used piping on either side of one of my fabric tabs to make the handle.

Then I stitched them all on the sewing machine, being sure to follow the stitching in the piping with my needle. I thought it would be hard to stay right on top of that line of thread, but it was in fact truly plain and I got into this zen-like rhythm with it. So there is hope for non-sewers out there (I would have laughed if you told me last week that I’d describe any sewing step as zen-like).

Then I did the exact same thing with the other circle…

… and also ran a little stitching along the piping on each side of the handle.

Then I had these:

Next I pinned the other side of the handle to the first side (print side in) and stitched along the thread on the other side that I had stitched when I followed along the piping.

Then I turned it inside out, which is where I got to see my purrrty purrrty piping. I know it is simply a handle, but at this point I ran outside to show John. Seriously, I was proud with a capital P. Then the sewing gods brought me back down to earth.

While sewing the ends closed (simply tucking them under and running them through the machine to get a line of thread to hold the handle closed) I broke a needle. Bam! And it was scary and frustrating and all that jazz. But I got back on the veritable horse. Thank goodness my sewing machine came with some extra needles so I simply popped one back in there and was off to the races again.

Next was pinning the circle to the long rectangular piece of fabric that wrapped around the whole perimeter (print side down).

Then I ran that through the sewing machine, again following the line of thread that I made when I sewed the piping on. See that subtle line of white thread around the perimeter below? I simply stitched right over that.

And then turned things rightside out, to see this striking sight. Wahoo! A partially piped beanbag! Then I pinned my handle in place and stitched that into place by making a box with an X in the middle of it (there are strong pics of this on the site with the walkthrough that I linked to ten million times above).

Then I turned it back inside out and pinned the other circle to the bottom of the rectangular piece of fabric that creates the middle part of the beanbag and stitched along the piping thread line again.

Except I did not seal the whole circle because I needed to turn the whole thing rightside out again…

… and stuff it with batting (I used four old pillows we had stashed in the linen closet that were well past their prime for the guest room but ideal for being recycled as beanbag innards).

Then I hand stitched it shut. I gotta admit that I purchased a zipper in the hopes of adding that (so I can unzip it and remove the batting to wash the cover) so I hope to “upgrade” my little beanbag someday. But in the meantime, I can consistently use a seam-ripper to open the hand-stitched part and simply resew that up after I run it through the wash (sewing this five inch part shut took about four minutes total).

And now for the craziest thing of all. See how the pattern on the top of the beanbag sort of curls over the top and drips down the side since it all lines up?

Um, yeah, that was an accident. The fabric was inside out at that point, so I randomly pinned it and stitched it and turned it rightside out later and said “holy cow, that was the best accident ever.” John even noticed it and sweetly complimented me on my “attention to detail” later, to which I sheepishly responded “total accident, dude – the fabric was inside out and I did not even notice- I simply randomly pinned it and sewed it up.” How crazy is that? Must be beginners sewing luck.

So that is how it all went down. Of course for the tenth time, this walkthrough is waaaay better than mine, so be sure to check it out if you have any questions! Now for the money stuff – here is the budget breakdown (thanks to a bunch of 50% off coupons at JoAnn):

• $0 for one yard of leftover fabric (originally from U-Fab here in Richmond)
• $2.38 for two 25 yard packs of white piping (from JoAnn thanks to coupons)
• $1.19 for a zipper that I vow to someday add (from JoAnn, again thanks to coupons)
• $1.50 for white thread (from JoAnn)
• Total: $5.07
  

Oh and do not forget to check in on Katie, Erin, and Cassie to see what amaaaaazing projects they whipped up (they’ll be sharing theirs sometime today as well)!

And now here is the part where we invite you to share all of the lively Pinterest Challenge projects that you folks have tackled in the last week (right along with us, well at least virtually with us). If you’ve already blogged about it, simply:

1. click on the blue “Add Your Link” button with the odd cartoon head at the bottom of this post (you might have to do some scrolling, depending how many projects are brought in)
2. add a link to your specific journal post about your project in the url field (not your home page)
3. where it says “name” write a descriptive name for your project (ex: “Homemade Beanbag”) as opposed to your actual name
4. we’d also enjoy if you could swiftly link back over to our project posts within your own (here is Katie’s, Cassie’s, Erin’s, and ours) – it is also pleasant to link to your inspiration project on Pinterest as well as to directly link to the original project/site, simply so they get some enjoy too.

And if you’d rather simply link over to your project in the comment section, feel free to do that – or even add a link to a free photo sharing site like Flickr with your pics if you do not have a journal (remember to set the gallery to public so we can all see it). We cannot wait to see what you’ve been up to! Freaky-deek-excited does not even begin to describe it.